Product Description
|
wireless RF remote control/ transmitter receiver for outdoor security system
|
|
|
Frequency
|
433.92MHz / 315MHz / customized
|
|
Channel
|
2-CH(1CH optional)
|
|
Encode
|
fixed code and rolling code
|
|
Current
|
5mA±2
|
Working voltage: 12 - 24V AC/DC
Frequency: 433.92 MHz
- Connect the two power supply wires, one to 12-24V and the other AC/DC
- When the power is initiated the LED will light for 1 second and the receiver is ready for instructions.
- LEARNING CODE: Press P1 for at least 1 second, the LED will light for 1 second, go off for 1 second and then light again, press any button on the remote, if the code is learnt the LED will blink, then release the button on the remote. If the remote cannot read the signal, the LED will light for 10 seconds and finish its learning status.
- PROGRAMMING METHOD:
A. Press P1 once, the LED flashes once and the first channel (monostable) activates.
B. Press P1 twice, the LED flashes twice and the second channel (monostable) activates.
C. Press P1 three times, the LED flashes three times and the first channel (bistable) activates.
D. Press P1 four times, the LED flashes four times and the second channel (bistable) activates
){kind=link}